Product Data Sheet
Stewart Systems Water based Conversion Coat

PRODUCT DESCRIPTION: A water-based product that eliminates rust by accomplishing two functions at the same time. First, rust is converted to ferric iron, a black organic compound. Second, a coating of clear acrylic is formed over the coated area. The surface that remains after the transformation can be either left black or coated with Aircraft Finishing Systems wide range of products for the desired outcome. Product tests have shown that Stewart Systems Conversion Coat has extended the life of equipment or products for several more years after probable replacement. Stewart Systems Conversion Coat can be used on all rusted surfaces.

ENVIRONMENTAL ADVANTAGES: Stewart Systems Water based Conversion Coat is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be flocculated, dried and sent to a "Class B" landfill. Check with your local and state regulations for proper handling.

CHARACTERISTICS:

• Excellent durability
• Can be applied to interior and exterior surfaces
• Final coating can be painted
• Distilled water is used for reduction
• Water is used for clean-up

• Non-Hazardous
• Coating will not flash rust on bare metal
• Shelf life of 1+ years
• Unused product can be returned to container
• Non-Flammable

USES:

• Schools
• Industrial Plants
• Homes
• Farms
• Machinery

• Automobiles
• Heavy Equipment
• Boats
• Tools
• Railroads

• VOC (Volatile Organic Compounds) .2 lb/gal, 35 gm/lt
• Free of lead and chromates

• Liquid - Cream Color
• Specific Gravity: 1
• Vapor Density: Heavier than air
• Evaporation Rate: Slower than ether
• VOC: .2lb/gal, 35 gm/lt

• Boiling Point: 212°F
• % Solids by weight: ND
• % Solids by volume: ND
• Weight per gallon: 10 lbs
• Flash Point: none

SPECIFICATIONS:
 Metals: Surface must be free of loose rust flakes with wire/steel brush.

APPLICATION:

1. Brush the coating on the substrate at a rate of 300 to 500 ft² per gallon.
2. Cover entire rusted area and allow to dry completely.
3. Stir contents before use. Never shake or stir under high agitation.
4. Shelf life: 1 year
5. Do not store at 32°F or lower.

CLEAN-UP WITH WATER
 Clean up with water immediately. If the conversion coat dries, solvents may have to be used for clean up.

Directions For Using ALL Stewart Systems Products

Main Menu   EverShield   Fabric Aircraft   Composite Aircraft   Metal Aircraft   Industrial Products
About Stewart Systems   Contact Us   Stewart Systems Distributors   Stewart Systems Direction For Use   New Products   Color Chart   Price List